**** BEFORE ORDERING – Please be sure to review the below options for each available type of this chassis set – Supports ProffieBoard only ****
Two-piece 3D printed chassis set. Ships in the following material options and ready for you to start your install. All models will be available in limited quantities:
– SLS/24mm speakers – Supports 24mm speakers* Printed in SLS (Selective Laser Sintering).
– SLS/28mm speakers – Supports 28mm (or 25mm) speakers* Printed in SLS (Selective Laser Sintering).
**** The 28mm speaker version of this chassis requires modifications to your speakers (and should only be performed by qualified installers following this instructional video):
https://www.youtube.com/watch?v=vvV4Ct2Laro
Now available upon request are adapters to support KR Sabers 25mm 3W speakers (only compatible with the 28mm chassis version).
“Davinium Customs Installation option” (Yes/No) – Select “Yes” if your install is being done by our partners over at Davinium Customs. Choosing “Yes” notifies us your chassis set will be printed in-house over at Davinium Customs. **** When using this option enter coupon code DONOTSHIP at checkout to remove shipping charges.
* All chassis sets were designed specifically for Smuggler’s Outpost Elite speakers. Note:
a) The Dark Side version of those speakers will not likely fit as they have a deeper base.
b) Also compatible with The Custom Saber Shop 4W 28mm WOWSpeaker, which works quite well with the sound resonance chamber in this hilt.
– Orders for the 28mm and 24mm SLS versions usually ship next business day).
This chassis set is completely and firmly anchored in place within your Saberz Project M hilt by a hex-driven “retention rivet screw” (which replace the standard rivets at the center of the hilt).
INCLUDED PARTS – What’s included with each chassis set:
oTwo 3D printed black custom chassis.
oA highly detailed 28-page PDF with in-depth instructions to install all the needed components into the chassis set for your Saberz Project M hilt (electronics are NOT included).
Saberz.com provides the following parts with the Project M hilt:
oTwo fully painted and weathered kill keys in high-impact Delrin (for emitter-side silver rivets).
oTwo aluminum fully-painted RCP hex-driven rivet RCP covers (to protect the RCP port when kill keys are not in use).
oTwo custom center-side aluminum fully-painted hex retention rivet screws (used to firmly secure the chassis into the hilt).
REQUIRED PARTS (NOT INCLUDED)
This chassis set is designed only for the Saberz.com Project M hilt and requires you to purchase the following parts:
– Proffieboard v2.2 (2)
– SanDisk or Patriot (suggested) SD card (2).
– SHTOKCUSTOMWORX NPXL V3 HILT SIDE PCB CONNECTOR – LONG PINS (2)
– NPXL LEDPCB Lens Covers (2)
– Keystone 18650 battery sleds (2)
– Brass tactile switches– (4) This chassis set is designed for 1.7mm (0.4mm plunger height).
– Speakers (2):
– [24mm chassis version] – Smuggler’s Outpost Elite 24mm 2W 4ohm Bass Speakers.
Or:
– [28mm chassis version] – The Custom Saber Shop 4W 28mm WOWSpeaker (or alternatively Smuggler’s Outpost 28mm Elite 2W 4OHM Bass Speakers).
Charger:
– 1A 3.7V Li-ion smart charger with 2.1mm plug
– 1.3mm recharge ports (2)
– 1.3mm recharge port adapter
– Sony Li-Ion 18650 3.7V 15A 3120mAh PCB Protected Rechargeable Batteries (2)
– Wire, solder, resin, etc… as outlined within the installation guide
Product links for the full list of needed parts is seen within the included installation guide PDF:
https://www.saberz.com/docs/Project-M-Chassis-Installation-Guide_v2.2.pdf
** Returns are not accepted. Please feel free to message us with any questions in advance of your purchase.
Disclaimers:
– This chassis set is designed ONLY for the Saberz.com Project M hilt (which is NOT included, only the 2 chassis parts are included).
– BEFORE ORDERING – THIS CHASSIS SET IS INTENDED FOR ADVANCED INSTALLERS ONLY! Be sure you have the required knowledge, skills and tools before performing such installs.
It is suggested to review the installation guide seen at the following link before purchasing this chassis:
http://lluciano.net/docs/Project_M_Chassis_Installation_Guide.pdf
– These 3-D parts are manufactured using the highest quality materials and processes. Nevertheless, it is very important to test-fit all components in the hilt BEFORE doing your install.
– As with any 3D-printed chassis, adjustments might need to be made (such as minor sanding of areas for exact fitment of components), however that is not common with the SLS version of this chassis set.
– All installation activities for your hilt, speakers, the associated hardware, (and this chassis set) are done completely at your own risk. Be sure you have the required knowledge, skills and tools before performing such installs or making any modifications.
– Some of the images for this product show examples of a completed chassis set installation, please note this listing ONLY includes the set of (2) 3D printed chassis.
Reviews
There are no reviews yet.